HOME / Shower Floor Replacement

Floor Replacement, Start to Finish

Old floor out at the wall line. New floor sloped to drain.

The cut line is everything: we remove the failed floor while preserving sound wall tile above it, then rebuild the base properly — sloped bed, bonded waterproofing lapped up the walls, new tile with full coverage, epoxy grout, sealed transitions. Berlin's small shower floors make this a one-to-two-day job, and the wall-to-floor joint — where every old floor failed — gets rebuilt as a movement joint, not a grout prayer.

  • Surgical removal. Floor out to a clean wall line; sound walls and glass preserved.
  • Substrate rebuilt. Sloped bed verified or re-poured — ponding is never 'normal.'
  • Waterproofed assembly. Membrane lapped up walls and clamped at the drain.
  • Full-coverage setting. No spot-bonding, no hollow tiles — ever.
  • Epoxy grout standard. Stain-proof joints that stay clean under daily use.
  • Tested handoff. Flow test to drain + walkthrough before final payment.
Materials

The Berlin floor rebuild

Floor systems we set across Berlin — grip, slope-fit and grout that lasts.

2x2 porcelain mosaic

The workhorse — grippy, cheap, perfect.

Penny rounds

Vintage grip, endless joints.

Pebble sheets

Spa texture, expert grout.

Small-format rects

Modern lines that turn slope.

Berlin notes

Kensington's older baths still run the original 4x4 wall tile over plaster, usually with a failing caulk line at the tub. The ranch baths are fiberglass tubs with surround panels yellowed at the seams — the classic re-tile trigger. Most Berlin replacements run day-one rebuild, day-two tile and grout: Berlin's most common call: a fiberglass surround gone yellow and chalky around a perfectly good tub — re-tile the walls, keep the tub. Shower again 24 hours after grout — timed to the hour at walkthrough.

FAQ

Common questions

How do you remove the floor without wrecking walls?

Cut line at the wall base, surgical removal inward, walls sheeted and braced. It's the core skill of floor-only work — we do it daily.

What slope does a shower floor need?

Minimum 1/4 inch per foot to the drain — verified with water before tile, not eyeballed. Ponding anywhere means re-do, on us.

Why epoxy grout on floors?

Shampoo, body oils and hard water destroy cement grout on floors within years. Epoxy is stain-proof and waterproof — roughly $100–$200 more per floor, worth every cent.

Do you replace the drain too?

We inspect every drain; clamping drains get cleaned and re-sealed, tired drains get replaced ($200–$600) while the floor is open — never tiled around and hoped about.